home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Languguage OS 2
/
Languguage OS II Version 10-94 (Knowledge Media)(1994).ISO
/
gnu
/
dejagnu.lha
/
dejagnu-1.0.1
/
tcl
/
doc
/
usenix.text
< prev
Wrap
Text File
|
1992-11-06
|
41KB
|
768 lines
Tcl: An Embeddable Command Language
John K. Ousterhout
Computer Science Division
Electrical Engineering and Computer Sciences
University of California at Berkeley
Berkeley, CA 94720
ouster@sprite.berkeley.edu
ABSTRACT
Tcl is an interpreter for a tool command language. It consists of a library
package that is embedded in tools (such as editors, debuggers, etc.) as the
basic command interpreter. Tcl provides (a) a parser for a simple textual
command language, (b) a collection of built-in utility commands, and (c)
a C interface that tools use to augment the built-in commands with
tool-specific commands. Tcl is particularly attractive when integrated with
the widget library of a window system: it increases the programmability of
the widgets by providing mechanisms for variables, procedures, expressions,
etc; it allows users to program both the appearance and the actions of
widgets; and it offers a simple but powerful communication mechanism between
interactive programs.
The work described here was supported in part by the National Science
Foundation under Grant ECS-8351961.
1. Introduction
Tcl stands for ``tool command language''. It consists of a library package
that programs can use as the basis for their command languages. The
development of Tcl was motivated by two observations. The first observation
is that a general-purpose programmable command language amplifies the power
of a tool by allowing users to write programs in the command language in
order to extend the tool's built-in facilities. Among the best-known
examples of powerful command languages are those of the UNIX shells [5]
and the Emacs editor [8]. In each case a computing environment of unusual
power has arisen, in large part because of the availability of a pro-
grammable command language.
The second motivating observation is that the number of interactive
applications is increasing. In the timesharing environments of the late
1970's and early 1980's almost all programs were batch-oriented. They
were typically invoked using an interactive command shell. Besides the
shell, only a few other programs needed to be interactive, such as editors
and mailers. In contrast, the personal workstations used today, with their
raster displays and mice, encourage a different system structure where a
large number of programs are interactive and the most common style of
interaction is to manipulate individual applications directly with a mouse.
Furthermore, the large displays available today make it possible for many
interactive applications to be active at once, whereas this was not practical
with the smaller screens of ten years ago.
Unfortunately, few of today's interactive applications have the power of the
shell or Emacs command languages. Where good command languages exist, they
tend to be tied to specific programs. Each new interactive application
requires a new command language to be developed. In most cases application
programmers do not have the time or inclination to implement a general-purpose
facility (particularly if the application itself is simple), so the resulting
command languages tend to have insufficient power and clumsy syntax.
Tcl is an application-independent command language. It exists as a
C library package that can be used in many different programs. The
Tcl library provides a parser for a simple but fully programmable command
language. The library also implements a collection of built-in commands
that provide general-purpose programming constructs such as variables,
lists, expressions, conditionals, looping, and procedures. Individual
application programs extend the basic Tcl language with application-specific
commands. The Tcl library also provides a set of utility routines to simplify
the implementation of tool-specific commands.
I believe that Tcl is particularly useful in a windowing environment, and that
it provides two advantages. First, it can be used as a general-purpose
mechanism for programming the interfaces of applications. If a tool is based
on Tcl, then it should be relatively easy to modify the application's user
interface and to extend the interface with new commands. Second, and more
important, Tcl provides a uniform framework for communication between tools.
If used uniformly in all tools, Tcl will make it possible for tools to work
together more gracefully than is possible today.
The rest of this paper is organized as follows. Section 2 describes the
Tcl language as seen by users. Section 3 discusses how Tcl is used in
applications, including the C-language interface between application
programs and the Tcl library. Section 4 describes how Tcl can be used
in a windowing environment to customize interface actions and appearances.
Section 5 shows how Tcl can be used as a vehicle for communication between
applications, and why this is important. Section 6 presents the status
of the Tcl implementation and some preliminary performance measurements.
Section 7 compares Tcl to Lisp, Emacs, and NeWS, and Section 8 concludes
the paper.
2. The Tcl Language
In a sense, the syntax of the Tcl language is unimportant: any programming
language, whether it is C [6], Forth [4], Lisp [1], or Postscript [2],
could provide many of the same programmability and communication advantages
as Tcl. This suggests that the best implementation approach is to borrow
an existing language and concentrate on providing a convenient framework for
the use of that language. However, the environment for an embeddable command
language presents an unusual set of constraints on the language, which are
described below. I eventually decided that a new language designed from
scratch could probably meet the constraints with less implementation effort
than any existing language.
Tcl is unusual because it presents two different interfaces: a textual
interface to users who issue Tcl commands, and a procedural interface to the
applications in which it is embedded. Each of these interfaces must be
simple, powerful, and efficient. There were four major factors in the
language design:
[1] The language is for commands.
Almost all Tcl ``programs'' will be short, many only one line long. Most
programs will be typed in, executed once or perhaps a few times, and then
discarded. This suggests that the language should have a simple syntax so
that it is easy to type commands. Most existing programming languages have
complex syntax; the syntax is helpful when writing long programs but would
be clumsy if used for a command language.
[2] The language must be programmable.
It should contain general programming constructs such as variables,
procedures, conditionals, and loops, so that users can extend the built-in
command set by writing Tcl procedures. Extensibility also argues for
a simple syntax: this makes it easier for Tcl programs to generate other
Tcl programs.
[3] The language must permit a simple and efficient interpreter.
For the Tcl library to be included in many small programs, particularly
on machines without shared-library facilities, the interpreter must not
occupy much memory. The mechanism for interpreting Tcl commands must be
fast enough to be usable for events that occur hundreds of times a second,
such as mouse motion.
[4] The language must permit a simple interface to C applications.
It must be easy for C applications to invoke the interpreter and easy
for them to extend the built-in commands with application-specific
commands. This factor was one of the reasons why I decided not to
use Lisp as the command language: Lisp's basic data types and storage
management mechanisms are so different than those of C that it would
be difficult to build a clean and simple interface between them.
For Tcl I used a data type (string) that is natural to C.
2.1. Tcl Language Syntax
Tcl's basic syntax is similar to that of the UNIX shells: a command consists
of one or more fields separated spaces or tabs. The first field is the name
of a command, which may be either a built-in command, an application-specific
command, or a procedure consisting of a sequence of Tcl commands. Fields
after the first one are passed to the command as arguments. Newline
characters are used as command separators, just as in the UNIX shells, and
semi-colons may be used to separate commands on the same line. Unlike the
UNIX shells, each Tcl command returns a string result, or the empty string
if a return value isn't appropriate.
There are four additional syntactic constructs in Tcl, which give the language
a Lisp-like flavor. Curly braces are used to group complex arguments; they
act as nestable quote characters. If the first character of an argument is a
open brace, then the argument is not terminated by white space. Instead, it
is terminated by the matching close brace. The argument passed to the command
consists of everything between the braces, with the enclosing braces stripped
off. For example, the command
set a {dog cat {horse cow mule} bear}
will receive two arguments: ``a'' and ``dog cat {horse cow mule} bear''.
This particular command will set the variable
a
to a string equal to the second argument. If an argument is enclosed
in braces, then none of the other substitutions described below is made
on the argument. One of the most common uses of braces is to specify a
Tcl subprogram as an argument to a Tcl command.
The second syntactic construct in Tcl is square brackets, which are used to
invoke command substitution. If an open bracket appears in an argument, then
everything from the open bracket up to the matching close bracket is treated
as a command and executed recursively by the Tcl interpreter. The result of
the command is then substituted into the argument in place of the bracketed
string. For example, consider the command
set a [format {Santa Claus is %s years old} 99]
The format command does printf-like formatting and returns the string
``Santa Claus is 99 years old'', which is then passed to set and assigned
to variable a.
The third syntactic construct is the dollar sign, which is used for variable
substitution. If it appears in an argument then the following characters are
treated as a variable name; the contents of the variable are substituted into
the argument in place of the dollar sign and name. For example, the commands
set b 99
set a [format {Santa Claus is %s years old} $b]
result in the same final value for a as the single command in the previous
paragraph. Variable substitution isn't strictly necessary since there are
other ways to achieve the same effect, but it reduces typing.
The last syntactic construct is the backslash character, which may be used
to insert special characters into arguments, such as curly braces or
non-printing characters.
2.2. Data Types
There is only one type of data in Tcl: strings. All commands, arguments
to commands, results returned by commands, and variable values are ASCII
strings. The use of strings throughout Tcl makes it easy to pass information
back and forth between Tcl library procedures and C code in the enclosing
application. It also makes it easier to pass Tcl-related information back
and forth between machines of different types.
Although everything in Tcl is a string, many commands expect their string
arguments to have particular formats. There are three particularly common
formats for strings: lists, expressions, and commands. A list is just a
string containing one or more fields separated by white space, similar to
a command. Curly braces may be used to enclose complex list elements; these
complex list elements are often lists in their own right, as in Lisp. For
example, the string
dog cat {horse cow mule} bear
is a list with four elements, the third of which is a list with three
elements. Tcl provides commands for a number of list-manipulation operations,
such as creating lists, extracting elements, and computing list lengths.
The second common form for a string is a numeric expression. Tcl
expressions have the same operators and precedence as expressions in C.
The "expr" Tcl command evaluates a string as an expression and returns the
result (as a string, of course). For example, the command
expr {($a < $b) || ($c != 0)}
returns ``0'' if the numeric value of variable a is less than that of
variable b, or if variable c is not zero; otherwise it returns
``0''. Several other commands, such as "if" and "for", expect one or more
of their arguments to be expressions.
The third common interpretation of strings is as commands (or sequences of
commands). Arguments of this form are used in Tcl commands that implement
control structures. For example, consider the following command:
if {$a < $b} {
set tmp $a
set a $b
set b $tmp
}
The "if" command receives two arguments here, each of which is delimited
by curly braces. "If" is a built-in command that evaluates its first
argument as an expression; if the result is non-zero, "if" executes its
second argument as a Tcl command. This particular command swaps the
values of the variables "a" and "b" if "a" is less than "b".
Tcl also allows users to define command procedures written in the Tcl
language. I will refer to these procedures as tclproc's, in order to
distinguish them from other procedures written in C. The "proc" built-in
command is used to create a tclproc. For example, here is a Tcl command
that defines a recursive factorial procedure:
proc fac x {
if {$x == 1} {return 1}
return [expr {$x * [fac [expr $x-1]]}]
}
The "proc" command takes three arguments: a name for the new tclproc, a
list of variable names (in this case the list has only a single element,
"x"), and a Tcl command that comprises the body of the tclproc. Once
this proc command has been executed, "fac" may be invoked just like any
other Tcl command. For example
fac 4
will return the string ``24''.
Figure 1 lists all of the built-in Tcl commands in groups. In addition to
the commands already mentioned, Tcl provides commands for manipulating
strings (comparison, matching, and printf/scanf-like operations), commands
for manipulating files and file names, and a command to fork a subprocess
and return the subprocess's standard output as result. The built-in Tcl
commands provide a simple but complete programming language. The built-in
facilities may be extended in three ways: by writing tclprocs; by invoking
other programs as subprocesses; or by defining new commands with C
procedures as described in the next section.
3. Embedding Tcl in Applications
Although the built-in Tcl commands could conceivably be used as a
stand-alone programming system, Tcl is really intended to be embedded
in application programs. I have built several application programs using
Tcl, one of which is a mouse-based editor for X called "mx". In the rest
of the paper I will use examples from mx to illustrate how Tcl interacts
with its enclosing application.
An application using Tcl extends the built-in commands with a few
additional commands related to that particular application. For
example, a clock program might provide additional commands to control
how the clock is displayed and to set alarms; the mx editor provides
additional commands to read a file from disk, display it in a window,
select and modify ranges of bytes, and write the modified file back to
disk. An application programmer need only write the application-specific
commands; the built-in commands provide programmability and extensibility
``for free''. To users, the application-specific commands appear the same
as the built-in commands.
Figure 2 shows the relationship between Tcl and the rest of an application.
Tcl is a C library package that is linked with the application. The Tcl
library includes a parser for the Tcl language, procedures to execute the
built-in commands, and a set of utility procedures for things like expression
evaluation and list management. The parser includes an extension interface
that may be used to extend the language's command set.
To use Tcl, an application first creates an object called an "interpreter",
using the following library procedure:
Tcl_Interp *Tcl_CreateInterp()
An interpreter consists of a set of commands, a set of variable bindings,
and a command execution state. It is the basic unit manipulated by most
of the Tcl library procedures.
Simple applications will use only a single interpreter, while more complex
applications may use multiple interpreters for different purposes. For
example, mx uses one interpreter for each window on the screen.
The Tcl library provides a parser for the Tcl language, a set of built-in
commands, and several utility procedures. The application provides
application-specific commands plus procedures to collect commands for
execution. The commands are parsed by Tcl and then passed to relevant
command procedures (either in Tcl or in the application) for execution.
Once an application has created an interpreter, it calls the
Tcl_CreateCommand procedure to extend the interpreter with
application-specific commands:
typedef int Tcl_CmdProc((ClientData) clientData, Tcl_Interp *interp,
int argc, char *argv[]);
Tcl_CreateCommand(Tcl_Interp *interp, char *name, Tcl_CmdProc proc,
ClientData clientData)
Each call to Tcl_CreateCommand associates a particular command name
(name) with a procedure that implements that command (proc) and an
arbitrary single-word value to pass to that procedure (clientData).
After creating application-specific commands, the application enters
a main loop that collects commands and passes them to the Tcl_Eval
procedure for execution:
int Tcl_Eval(Tcl_Interp *interp, char *cmd)
In the simplest form, an application might simply read commands from the
terminal or from a file. In the mx editor Tcl commands are associated
with events such as keystrokes, mouse buttons, or menu activations; each
time an event occurs, the corresponding Tcl command is passed to Tcl_Eval.
The Tcl_Eval procedure parses its cmd argument into fields, looks up the
command name in the table of those associated with the interpreter, and
invokes the command procedure associated with that command. All command
procedures, whether built-in or application-specific, are called in the
same way, as described in the typedef for Tcl_CmdProc above.
A command procedure is passed an array of strings describing the command's
arguments (argc and argv) plus the clientData value that was associated
with the command when it was created. ClientData is typically a pointer
to an application-specific structure containing information needed to
execute the command. For example, in mx the clientData argument points
to a per-window data structure describing the file being edited and the
window it is displayed in.
Control mechanisms like "if" and "for" are implemented with recursive
calls to Tcl_Eval. For example, the command procedure for the "if"
command evaluates its first argument as an expression; if the result
is non-zero, then it calls Tcl_Eval recursively to execute its second
argument as a Tcl command. During the execution of that command, Tcl_Eval
may be called recursively again, and so on. Tcl_Eval also calls itself
recursively to execute bracketed commands that appear in arguments.
Even tclprocs such as fac use this same basic mechanism.
When the "proc" command is invoked to create "fac", the proc command
procedure creates a new command by calling Tcl_CreateCommand as
illustrated in Figure 3. The new command has the name "fac". Its
command procedure ("proc" in the call to Tcl_CreateCommand) is a
special Tcl library procedure called "InterpProc", and its clientData
is a pointer to a structure describing the tclproc. This structure
contains, among other things, a copy of the body of the tclproc (the
third argument to the proc command). When the fac command is invoked,
Tcl_Eval calls InterpProc, which in turn calls Tcl_Eval to execute the
body of the tclproc. There is some additional code required to associate
the argument of the fac command (which is passed to InterpProc in its argv
array) with the "x" variable used inside fac's body, and to support variables
with local scope, but much of the mechanism for tclprocs is the same as that
for any other Tcl command.
The creation and execution of a tclproc (a procedure written in Tcl):
(a) the proc command is invoked, e.g. to create the fac procedure; (b)
the Tcl parser invokes the command procedure associated with proc; (c)
the proc command procedure creates a data structure to hold the Tcl
command that is fac's body; (d) fac is registered as a new Tcl command,
with InterpProc as its command procedure; (e) fac is invoked as a Tcl
command; (f) the Tcl parser invokes InterpProc as the command procedure
for fac; (g) InterpProc retrieves the body of fac from the data structure;
and (h) the Tcl commands in fac's body are passed back to the Tcl parser
for execution.
A Tcl command procedure returns two results to Tcl_Eval: an integer return
code and a string. The return code is returned as the procedure's result,
and the string is stored in the interpreter, from which it can be retrieved
later. Tcl_Eval returns the same code and string to its caller.
Table I summarizes the return codes and strings.
Normally the return code is TCL_OK and the string contains the result of
the command. If an error occurs in executing a command, then the return
code will be TCL_ERROR and the string will describe the error condition.
When TCL_ERROR is returned (or any value other than TCL_OK), the normal
action is for nested command procedures to return the same code and string
to their callers, unwinding all pending command executions until eventually
the return code and string are returned by the top-level call to Tcl_Eval.
At this point the application will normally display the error message for
the user by printing it on the terminal or displaying it in a notifier
window.
Return codes other than TCL_OK or TCL_ERROR cause partial unwinding. For
example, the break command returns a TCL_BREAK code. This causes nested
command executions to be unwound until a nested "for" or "foreach" command
is reached. When a "for" or "foreach" command invokes Tcl_Eval recursively,
it checks specially for the TCL_BREAK result. When this occurs the "for" or
"foreach" command terminates the loop, but it doesn't return the TCL_BREAK
code to its caller. Instead it returns TCL_OK. Thus no higher levels of
execution are aborted. The TCL_CONTINUE return code is also handled by the
"for" and "foreach" commands (they go on to the next loop iteration) and
TCL_RETURN is handled by the InterpProc procedure. Only a few command
procedures, like "break" and "for", know anything about special return codes
such as TCL_BREAK; other command procedures simply abort whenever they see any
return code other than TCL_OK.
The "catch" command may be used to prevent complete unwinding on TCL_ERROR
returns. Catch takes an argument that is a Tcl command to execute. It
passes the command to Tcl_Eval for execution, but always returns TCL_OK.
If an error occurs in the command, catch's command procedure detects the
TCL_ERROR return value from Tcl_Eval, saves information about the error
in Tcl variables, and then returns TCL_OK to its caller. In almost all
cases I think the best response to an error is to abort all command
invocations and notify the user; catch is provided for those few occasions
where an error is expected and can be handled without aborting.
4. Tcl and Window Applications
An embeddable command language like Tcl offers particular advantages in
a windowing environment. This is partly because there are many interactive
programs in a windowing environment (hence many places to use a command
language) and partly because configurability is important in today's
windowing environments and a language like Tcl provides the flexibility
to reconfigure.
Tcl can be used for two purposes in a window application: to configure the
application's interface actions, and to configure the application's
interface appearance. These two purposes are discussed in the paragraphs
below.
The first use of Tcl is for interface actions. Ideally, each event that
has any importance to the application should be bound to a Tcl command.
Each keystroke, each mouse motion or mouse button press (or release), and
each menu entry should be associated with a Tcl command. When the event
occurs, it is first mapped to its Tcl command and then executed by passing
the command to Tcl_Eval. The application should not take any actions
directly; all actions should first pass through Tcl. Furthermore, the
application should provide Tcl commands that allow the user to change the
Tcl command associated with any event.
In interactive windowing applications, the use of Tcl will probably not be
visible to beginning users: they will manipulate the applications using
buttons, menus, and other interface components. However, if Tcl is used as
an intermediary for all interface actions then two advantages accrue. First,
it becomes possible to write Tcl programs to reconfigure the interface.
For example, users will be able to rebind keystrokes, change mouse buttons,
or replace an existing operation with a more complex one specified as a set of
Tcl commands or tclprocs. The second advantage is that this approach forces
all of the application's functionality to be accessible through Tcl: anything
that can be invoked with the mouse or keyboard can also be invoked with Tcl
programs. This makes it possible to write tclprocs that simulate the actions
of the program, or that compose the program's basic actions into more powerful
actions. It also permits interactive sessions to be recorded and replayed as
a sequence of Tcl commands (see Section 5).
The second use for Tcl in a window application is to configure the appearance
of the application. All of the application's interface components
(``widgets'' in X terminology), such as labels, buttons, text entries, menus,
and scrollbars, should be configured using Tcl commands. For example, in
the case of a button the application (or the button widget code) should provide
Tcl commands to change the button's size and location, its text, its colors,
and the action (a Tcl command, of course) to invoke when the button is
activated. This makes it possible for users to write Tcl programs to
personalize the layout and appearance of the applications they use. The most
common use of such reconfigurability would probably be in Tcl command files
read by programs automatically when they start execution. However, the
Tcl commands could also be used to change an application's appearance while
it is running, if that should prove useful.
If Tcl is used as described above, then it could serve as a specification
language for user interfaces. User interface editors could be written to
display widgets and let users re-arrange them and configure attributes such
as colors and associated Tcl commands. The interface editor could then
output information about the interface as a Tcl command file to be read by
the application when it starts up.
Some current interface editors output C code which must then be compiled
into the application [7]; unfortunately this approach requires an
application to be recompiled in order to change its interface (or,
alternatively, it requires a dynamic-code-loading facility). If Tcl
were used as the interface specification language then no recompilation
would be necessary and a single application binary could support many
different interfaces.
5. Communication Between Applications
The advantages of an embedded command language like Tcl become even
greater if all of the tools in an environment are based on the same
language. First, users need only learn one basic command language;
to move from one application to another they need only learn the
(few?) application-specific commands for the new application. Second,
generic interface editors become possible, as described in the previous
section. Third, and most important in my view, Tcl can provide a means
of communication between applications.
I have implemented a communication mechanism for X11 in the form of an
additional Tcl command called "send". For send to work, each Tcl
interpreter associated with an X11 application is given a textual name,
such as "xmh" for an X mail handler or mx.foo.c for a window in which
mx is displaying a file named foo.c. The send command takes two arguments:
the name of an interpreter and a Tcl command to execute in that interpreter.
"Send" arranges for the command to be passed to the process containing the
named interpreter; the command is executed by that interpreter and the
results (return code and string) are returned to the application that
issued the "send" command.
The X11 implementation of send uses a special property attached to the
root window. The property stores the names of all the interpreters plus
a window identifier for each interpreter. A command is sent to an interpreter
by appending it to a particular property in the interpreter's associated
window. The property change is detected by the process that owns the
interpreter; it reads the property, executes the command, and appends
result information onto a property associated with the sending application.
Finally, the sending application detects this change of property, reads
the result information, and returns it as the result of the send command.
The send command provides a powerful way for one application to control
another. For example, a debugger could send commands to an editor to
highlight the current source line as it single-steps through a program.
Or, a user interface editor could use send to manipulate an application's
interface directly: rather than modifying a dummy version of the
application's interface displayed by the interface editor, the interface
editor could use send to modify the interface of a ``live'' application,
while also saving the configuration for a configuration file. This would
allow an interface designer to try out the look and feel of a new interface
incrementally as changes are made to the interface.
Another example of using send is for changing user preferences. If one
user walks up to a display that has been configured for some other user,
the new user could run a program that finds out about all the existing
applications on the screen (by querying the property that contains their
names), reads the new user's configuration file for each application, and
sends commands to that application to reconfigure it for the new user's
preferences. When the old user returns, he or she could invoke the same
program to restore the original preferences.
"Send" could also be used to record interactive sessions involving multiple
applications and then replay the sessions later (e.g. for demonstration
purposes). This would require an additional Tcl command called trace;
trace would take a single argument (a Tcl command string) and cause that
command string to be executed before each other command was executed in
that interpreter. Within a single application, trace could be used to record
each Tcl command before it is executed, so that the commands could be replayed
later. In a multi-application environment, a recorder program could be built
using send. The recorder sends a trace command to each application to be
recorded. The trace command arranges for information to be sent back
to the recorder about each command executed in that application. The
recorder then logs information about which applications executed which
commands. The recorder can reexecute the commands by "send"-ing them
back to the applications again. The trace command does not yet exist
in Tcl, but it could easily be added.
Send provides a much more powerful mechanism for communication between
applications than is available today. The only easy-to-use form of
communication for today's applications is the selection or cut buffer:
a single string of text that may be set by one application and read by
another. Send provides a more general form of communication akin to
remote procedure call [3]. If all of an application's functionality is
made available through Tcl, as described in Section 4, then send makes
all of each application's functionality available to other applications
as well.
If Tcl (and send) were to become widely used in window applications, I
believe that a better kind of interactive environment would arise,
consisting of a large number of small specialized applications rather
than a few monolithic ones. Today's applications cannot communicate
with each other very well, so each application must incorporate all
the functionality that it needs. For example, some window-based debuggers
contain built-in text editors so that they can highlight the current
point of execution. With Tcl and send, the debugger and the editor could
be distinct programs, with each sending commands to the other as necessary.
Ideally, monolithic applications could be replaced by lots of small
applications that work together in exciting new ways, just as the UNIX
shells allowed lots of small text processing applications to be combined
together. I think that Tcl, or some other language like it, will provide
the glue that binds together the windowing applications of the 1990's.
6. Status and Performance
The Tcl language was designed in the fall of 1987 and implemented in the
winter of 1988. In the spring of 1988 I incorporated Tcl into the mx
editor (which already existed, but with an inferior command language),
and also into a companion terminal emulator called Tx. Both of these
programs have been in use by a small user community at Berkeley for
the last year and a half. All of the Tcl language facilities exist as
described above, except that the send command is still in prototype form
and trace hasn't been implemented. Some of the features described in
Section 4, such as menu and keystroke bindings, are implemented in mx, but
in an ad hoc fashion: Tcl is not yet integrated with a widget set. I am
currently building a new toolkit and widget set that is based entirely on
Tcl. When it is completed, I expect it to provide all of the features
described in Section 4. As of this writing, the implementation has barely
begun.
Table II shows how long it takes Tcl to execute various commands on two
different workstations. On Sun-3 workstations, the average time for simple
commands is about 500 microseconds, while on DECstation 3100's the average
time per command is about 160 microseconds. Although mx does not currently
use a Tcl command for each mouse motion event, the times in Table II suggest
that this would be possible, even on Sun-3 workstations, without significant
degradation of response. For example, if mouse motion events occur 100 times
per second, the Tcl overhead for dispatching one command per event will
consume only about 1-2% of a Sun-3 processor.
For the ways in which Tcl is currently used (keystroke and menu bindings
consisting of a few commands), there are no noticeable delays associated
with Tcl. For application-specific commands such as those for the mx editor,
the time to execute the command is much greater than the time required by
Tcl to parse it and call the command procedure.
The Tcl library is small enough to be used in a wide variety of programs, even
on systems without mechanisms for sharing libraries. The Tcl code consists of
about 7000 lines of C code (about half of which is comments). When compiled
for a Motorola 68000, it generates about 27000 bytes of object code.
7. Comparisons
The Tcl language has quite a bit of surface similarity to Lisp, except
that Tcl uses curly braces or brackets instead of parentheses and no braces
are needed around the outermost level of a command. The greatest difference
between Tcl and Lisp is that Lisp evaluates arguments by default, whereas
in Tcl arguments are not evaluated unless surrounded by brackets. This
means that more typing effort is required in Tcl if an argument is to be
evaluated, and more typing effort is required in Lisp if an argument is
to be quoted (not evaluated).
It appeared to me that no-evaluation is usually the desired result in
arguments to a command language, so I made this the default in Tcl.
Tcl also has fewer data types than Lisp; this was done in order to simplify
the interface between the Tcl library and an enclosing C application.
The Emacs editor is similar to Tcl in that it provides a framework that
can be used to control many different application programs. For example,
subprocesses can be run in Emacs windows and users can write Emacs command
scripts that (a) generate command sequences for input to the applications
and (b) re-format the output of applications. This allows users to embellish
the basic facilities of applications, edit their output, and so on.
The difference between Emacs and Tcl is that the programmability is
centralized in Emacs: applications cannot talk to each other unless Emacs
acts as intermediary (e.g. to set up a new communication mechanism between
two applications, code must be written in Emacs to pass information back
and forth between the applications). The Tcl approach is decentralized:
each application has its own command interpreter and applications may
communicate directly with each other.
Lastly, it is interesting to compare Tcl to NeWS [9], a window system that
is based on the Postscript language. NeWS allows applications to down-load
a window server in order to change the user interface and modify other
aspects of the system. In a sense, this is similar to the "send" command in
Tcl, in that applications may send programs to the server for execution.
However, the NeWS mechanism is less general than Tcl: NeWS applications
generate Postscript programs as output but they do not necessarily respond
to Postscript programs as input. In other words, NeWS applications can
affect each others' interfaces, by controlling the server, but they cannot
directly invoke each others' application-specific operations as they can
with Tcl.
To summarize, the Tcl approach is less centralized than either the Emacs
or NeWS approaches. For a windowing environment with large numbers of
independent tools, I think the decentralized approach makes sense.
In fairness to Emacs, it's important to point out that Emacs wasn't designed
for this environment, and that Emacs works quite nicely in the environment
for which it was designed (ASCII terminals with batch-style applications).
It's also worth noting that direct communication between applications was
not an explicit goal of the NeWS system design.
8. Conclusions
I think that Tcl could improve our interactive environments in three general
ways. First, Tcl can be used to improve individual tools by providing them
with a programmable command language; this allows users to customize tools
and extend their functionality. Second, Tcl can provide a uniform command
language across a range of tools; this makes it easier for users to program
the tools and also allows tool-independent facilities to be built, such as
interface editors. Third, Tcl provides a mechanism for tools to control
each other; this encourages a more modular approach to windowing applications
and makes it possible to re-use old applications in new ways. In my opinion
the third benefit is potentially the most important.
My experiences with Tcl so far are positive but limited. Tcl needs a larger
user community and a more complete integration into a windowing toolkit before
it can be fully evaluated. The Tcl library source code is currently available
to the public in a free, unlicensed form, and I hope to produce a Tcl-based
toolkit in the near future.
9. Acknowledgments
The members of the Sprite project acted as guinea pigs for the editor and
terminal emulator based on Tcl; without their help the language would
not have evolved to its current state. Fred Douglis, John Hartman,
Ken Shirriff, and Brent Welch provided helpful comments that improved the
presentation of this paper.
10. References
[1] Abelson, H. and Sussman, G.J.
Structure and Interpretation of Computer Programs,
MIT Press, Cambridge, MA, 1985.
[2] Adobe Systems, Inc.
Postscript Language Tutorial and Cookbook,
Addison-Wesley, Reading, MA, 1985.
[3] Birrell, A. and Nelson, B.
``Implementing Remote Procedure Calls.''
ACM Transactions on Computer Systems,
Vol. 2, No. 1, February 1986, pp. 39-59.
[4] Brodie, L.
Starting FORTH: An Introduction to the FORTH Language and
Operating System for Beginners and Professionals,
Prentice Hall, Englewood Cliffs, NJ, 1981.
[5] Kernighan, B.W. and Pike, R.
The UNIX Programming Environment,
Prentice Hall, Englewood Cliffs, NJ, 1984.
[6] Kernighan, B.W. and Ritchie, D.M.
The C Programming Language,
Second Edition,
Prentice Hall, Englewood Cliffs, NJ, 1988.
[7] Mackey, K., Downs, M., Duffy, J., and Leege, J.
``An Interactive Interface Builder for Use with Ada Programs,''
Xhibition Conference Proceedings, 1989.
[8] Stallman, R.
GNU Emacs Manual,
Fourth Edition,
Version 17,
February 1986.
[9] Sun Microsystems, Inc.
NeWS Technical Overview,
Sun Microsystems, Inc.
PN 800-1498-05, 1987.